Origin	China
Brand Name	KING OG TRANSFER

Easy pressure adjustment

Solid Steel welded framework

Hardened high-strength pivot points,

Digital time and temperature readout with Auto Reset Timer

The silica gel in the motherboard can endure high temperature, it won’t be distorted at 400��span lang="EN-US">

Temperature readout accuracy +-1C
Heat indicating light

Operation instructions included

State-of-the-art Digital Control system

Easy operation and High quality 

Automatic Alarm

This heat transfer machine can be used for T-shirts, mouse mats, jigsaw puzzles, door hangers, ceramic tiles, ID badges and just about every other flat surface item you may want to use dye sublimation for.

Manual:

Put a T-shirt in the machine; put the printed sublimation paper on the T-shirt properly.

1.       Get ready on the power, press the power, press the power button, the indicator is lighted!

2.       Adjust the temperature (170��span lang="EN-US">-190��span lang="EN-US">) and time (about 8 seconds). When the temperature reaches the right degree, the indicator on the top of the temperature-adjuster switch off.

3.       Put the heating flat down (please note the right surface of paper) Please note that the pressure should be no too much, or too little!

4.       When the temperature gets to the set time, the buzzer rings (please turn off the button and raise the handspike and take out the T-shirt

5.       Take off the paper from the T-shirt a.s.a.p. If too slow, the paper will stick to the T-shirt, and to get off. Then put the printed T-shirt into water for a while. Now an individual T-shirt is made by you!